Products/Services

FLUX CORE WELDING TRAINING COURSES IN LEPHALALE [ 015 023 1757 ]

Price:7000

Call/Whatsapp; 0769107752 - FLUX CORE WELDING TRAINING COURSES ELLISRAS, LIMPOPO PROVINCE
Skills are attained at the Flux core welding training centre at minimal welder course fees and the welders earn a salary from R6000-R25000 per month. .

Unit Standard No: 14719
Unit Standard Credits: 8
NQF Level: 3

Modules for the course include
Introduction to the Process
Principles of Operation
Equipment for Welding
Equipment Setup, Operation, and Shut Down
Shielding Gas and Electrodes
Welding Applications
Welding Metallurgy
Weld and Joint Design
Welding Procedure Variables
Welding Procedure Schedules
Pre-weld Preparations
Welding Discontinuities and Problems
Post-weld Procedures
Welder Training and Qualification
Welding Safety

COUNTER BALANCED LIFT TRUCK - FORKLIFT TRAINING IN LEPHALALE [ 015 023 1757 ]

Price:

Call/Whatsapp; 0769107752 - Counterbalance Lift Truck Training Course in Ellisras

This NQF Level 3 course consists of a span of 13 modules covering aspects such as regulations, mechanical appreciation and principles of operating a lift truck to name but a few.

Once a person is accredited with this unit standard, he or she will be able to operate a lift truck safely and efficiently. Maintenance skills will enable the learner to take basic care of the equipment so as to apply with legislated standards.

Target: Operators of lift Trucks: Code 01-16 (Forklifts, Side Loaders, and Turret Trucks etc.)
Duration: Novice: 05 days; Refresher: 01 day
Description: Safety, Principles of operation, Maneuvering, Stacking, Maintenance, etc.
Legislation: Occupational Health & Safety Act of 1993

WORKING AT HEIGHTS TRAINING COURSE IN LEPHALALE [ 015 023 1757 ]

Price:

Call/Whatsapp; 0769107752 - Working at Heights Training Course in Ellisras, Limpopo Province
Working at heights is considered to occur any place where there exists the risk of a person falling a distance of 2m or more as well as any place where a person can gain access to an area within a 2m radium of an open unprotected edge, whereby he or she runs the risk of falling a distance of 2m or more.

Accidents can usually be attributed to unsafe conditions, for this reason it is important that the necessary assessment is completed in terms of analyzing job hazards. That is why height safety training is essential.

In this working at heights training course we will look topics such as legislation relating to working at heights, occupational health and safety regulations and safety equipment, to name but a few of the items we will explore. We will equip you to get your working at heights certificate.

Working at Heights Training and Courses
(Unit Standard: 229998 – NQF Level: 1 – Credits: 2) – Explain and perform fall arrest techniques when working at height

This course is designed around four modules covering topics like managing the scene of an emergency, the basic human anatomy and physiology as well as the primary and secondary survey.

TRUCK MOUNTED CRANE TRAINING IN LEPHALALE [ 015 023 1757 ]

Price:4500

Call/Whatsapp; 0769107752 - Truck mounted operator training course fees is affordable for any one, Operators earn a salary from R 7000 - R 27000 depending on the experience of the driver.

Skills include: Demonstrating the knowledge of the functions of a truck mounted crane, Identifying the safety and suitability of the crane, Inspecting and recording the operational fitness of the truck and the crane. Operating a truck mounted crane, Assessing available system support and emergency services in case of incidents and accidents.

Unit Standard No: 242878
Unit Standard Credits: 8
NQF Level: 3

Modules in this course include
Introduction
Safety
Model Description.
Controls .
Before Operating the Machine
General Operating Procedures
Maintenance

FRONT END LOADER OPERATOR TRAINING COURSES IN LEPHALALE [ 015 023 1757 ]

Price:3500

Call/Whatsapp; 0769107752 - Front End Loader Courses In Ellisras, Limpopo Province
Skills are attained at the front end loader training centre at minimal front end loader course fees with operators earning an average salary of R10000 per month. .

Unit Standard No: 262747
Unit Standard Credits: 12
NQF Level: 2

Modules for front end loader driver training include
Demonstrating knowledge of the functions of a front end loader.
Planning for work activities and prepare work area.
Starting and shutting down front end loader.
Operating front end loader.
Transporting front end loader to and from site.

GRADER OPERATOR TRAINING COURSE IN LEPHALALE [ 015 547 0555 ]

Price:4500

Call/Whatsapp; 0769107752 - Grader Operator Course In Ellisras, Limpopo Province

Skills are attained at the grader training centre at minimal grader course fees and grader driver salary is between R12000 - R27000 month. .

Unit Standard No: 262735
Unit Standard Credits: 15
NQF Level: 2

Modules for grader operator course include
Demonstrating knowledge of the functions of a grader.
Planning for work activities and preparing work area.
Starting and shutting down grader.
Operating grader.
Transporting grader to and from site.

LHD SCOOP OPERATOR TRAINING COURSES LEPHALALE [ 015 547 0555 ]

Price:7000

Call/Whatsapp; 0769107752 - LHD SCOOP OPERATOR TRAINING IN ELLISRAS

Skills are attained at the Lhd training centre at minimal LHD course fees and an operator earn an average salary of R10000 per month. .

Unit Standard No: 244476
Unit Standard Credits: 4
NQF Level: 2

Modules for LHD mining training services include
Explain the specified requirements pertaining to the transfer of broken rock by means of a diesel powered load haul dumper.
Prepare to transfer broken rock with a diesel powered load haul dumper.
Transfer broken rock with a diesel powered load haul dumper.
Perform post-transferring activities.

TOWER CRANE OPERATOR TRAINING IN LEPHALALE [ 015 547 0555 ]

Price:7000

Call/Whatsapp; 0769107752 - Tower Crane Operator Training Courses In Ellisras, Limpopo Province

Skill attained during the tower crane training centre at minimal fees and the operator operators earn average salary of R 15000 per month, from R 7000-R 27000. .

Unit Standard No: 116255
Unit Standard Credits: 20
NQF Level: 2

Modules in this course include

At our tower crane school students learn how to operate the crane in a safe and efficient manner in accordance with the manufacturer’s instructions and the site specific lifting plan at a cheaper tower crane operator course fee.
The Lifting Team

Responsibilities of the Principal Contractor (Site)
Responsibilities of the Crane Operator
Operator Qualifications and Health
Resolution of Issues on Site
Lifting Operations
Wind and Taking the Crane out of Service
Procedures
Hand Signals
At our tower crane training centre students learn how to operate the tower crane in hazardous areas and lifting operations which require care like lifting persons and blind lifting.
During the tower crane driver training the student learns to operate a crane in strong wind, rain, lightening and hail with suspended load
Extreme care should be taken with luffing jib cranes when working in high winds with the jib at minimum radius as the jib can be blown backwards with serious consequences

FORKLIFT OPERATOR TRAINING COURSES LEPHALALE [ 015 547 0555 ]

Price:

Call/Whatsapp; 0769107752 - Skill attained at the forklift training centre an minimal forklift course fees. Forklift truck operators work in warehouses and stores. .

Unit Standard No: 242974
Unit Standard Credits: 7
NQF Level: 3

Modules for Forklift driver training include

Explain the specified requirements pertaining to lifting, securing, transferring and positioning of loads.
Prepare for lifting, securing, transferring and positioning of loads.
Operate the forklift.
Perform post-lifting, securing, transferring and positioning activities.

BOILERMAKER TRAINING SCHOOL IN LEPHALALE [ 015 547 0555 ]

Price:

Call/Whatsapp; 0769107752 - Skills are attained at the Boilermaker training centre at minimal boilermaker course fees and the salary then earn range from R 8000 - 30000 per month. .

Unit Standard No: 58720
Unit Standard Credits: 138
NQF Level: 3

Modules for the Boiler making training include

Demonstrate an understanding of a variety of engineering fabrication methods.
Interpret structural and engineering drawings.
Develop and lay out metal work pieces for fabrication.
Produce metal components of some complexity.
Use and maintain engineering hand and power tools.
Adhere to Occupational Health, Safety and Environmental requirements.
Communicate with peers and members of supervisory levels.